PE PP ABS PMMA takardar samar da layin
Bayani:
Wannan samar da layin kunshi guda dunƙule filastik extruder, injin atomatik ciyar naúrar, dehumidifiers bushewa hopper, takardar mutu, 3 nadi-ray naúrar, dumama da matakin naúrar, yi sanyaya naúrar, gefen yankan naúrar, gogayya, sausaya naúrar, nadi conveyor naúrar.Tare da halaye na m tsarin, m yi, dunƙule da ganga gyara zane da kuma yin amfani da high-yi gami 38CrMoAiA sana'a aiki wanda tabbatar da cewa dukan samar line uniform robobi hannun barga extrusion, high yawan amfanin ƙasa, tsawon rai da sauran abũbuwan amfãni.Ganga tana amfani da dumama dumama aluminium, sanyaya iska da ainihin kayan sarrafa zafin jiki na lantarki;Madaidaicin girman girman da naúrar-ray don daidaita samfuri mai kyau siffa;Yankan naúrar sun ɗauki ƙayyadaddun yankan tsayi don tabbatar da tsayin daka.
Aikace-aikace:
PE / PP / ABS Single da Multi-Layer Sheet ne yafi shafi likita kayan sassa, sealing, yankan jirgin, yadu amfani da sinadaran masana'antu, inji, wutar lantarki, tufafi, marufi, da kuma abinci masana'antu, a gas sufuri, ruwa samar, magudanar ruwa, ban ruwa, da filayen mai da mashina da sadarwa, da sauran fagage, musamman a harkar sufurin iskar gas ya zama abin amfani a duniya.
Babban Ingancin PE PP PVC ABS PS Sheet Board Yin Layin Samar da Injin
Ƙirƙirar Layin Samfura
dunƙule guda ɗaya ko dunƙule fiɗa biyu, mai canza allo da mold, calender nadi uku, sashi mai sanyaya, jujjuya injin, injin yankan juzu'i, stacker auto (ko winder).
Amfani
Absorbing na kasa da kasa ci-gaba da fasaha da kuma sana'a, mun ɓullo da wadannan PE / PP / PVC / ABS / PS / PC / PMMA hukumar takardar samar Lines, wanda aka yafi amfani da su samar da PE / PP / PVC / ABS / PS / PC / PMMA jirgin. takardar tare da kauri 0.35-60mm, nisa 500-3000mm.
Siga
Duk sassan da sassan na samar da layin sun fito ne daga sanannun alamar duniya, haɗe tare da shekarun kamfaninmu na kwarewa da fasaha mai girma a cikin samar da injunan jirgi (sheet), yana sa na'urar ta kasance mafi aminci kuma cikakke.
Yanayin aikace-aikacen:
1.PP lokacin farin ciki
PP lokacin farin ciki allon za a iya amfani da ko'ina a cikin sinadaran masana'antu, abinci masana'antu, anti-lalata masana'antu, tsarkakewa masana'antu, da kuma kare muhalli kayan aiki samar masana'antu.
2. PE lokacin farin ciki
Ana amfani da katako mai kauri na PP a cikin sinadarai, wutar lantarki da sauran masana'antu, kuma ana iya amfani da zanen gado na HDPE azaman robobin injiniya a cikin injina, sinadarai da sauran kayan aiki, kuma ana amfani da su sosai wajen kera bangon bangon hockey na kankara.
3. ABS lokacin farin ciki
Ana amfani da katako mai kauri na ABS a cikin kayan gida, kayan lantarki, marufi, kayan aikin likita da sauran fannoni.
4.PS allo takardar
PS board sheet, PS co-extruded biyu-launi takardar, PS hukumar takardar ana amfani da gini, talla, sufuri, magani, jama'a kaya, masana'antu, lighting, gida kayan, da dai sauransu
5. PC allo
PC, jirgin, yadu amfani a yi, aikin injiniya da kuma ado, da dai sauransu.
6. PMMA acrylic allon
PMMA acrylic board ana amfani dashi sosai a cikin firiji, kwandishan, talla, gini, sinadarai na kare muhalli, gidan wanka da sauran filayen.
7. PVC takardar / allo
Adon bangon bango, samfuran blister da sauransu.
Ƙayyadaddun bayanai:
| Sukudi drive ikon mota | 30-315 kw |
| Diamita na dunƙule | 45-150 mm |
| Screw L/D rabo | 33/1-38/1 |
| Matsakaicin saurin dunƙulewa | 110rpm |
| Max extruding samfurin iya aiki | 30-600kg/h |
| Max samar da layin gudun | 10m/min |
| Faɗin samfuran | 600-2500 mm |
| Kaurin samfuran | 0.6-20 mm |
Jerin kayan aiki
| NO | Sunan Inji | QTY |
| 1 | Conical biyu dunƙule extruder ko Single dunƙule extruder | 1 saiti |
| 2 | metering famfo da allon canza fuska | 1 saiti |
| 3 | Mold | 1 saiti |
| 4 | Na'ura mai kaifi uku | 1 saiti |
| 5 | Kula da yanayin zafi don kalanda | 1 saiti |
| 6 | Kwancen sanyaya, na'urar yankan baki | 1 saiti |
| 7 | Injin cirewa | 1 saiti |
| 8 | Auto- Stacker ko Wind tasha Biyu | 1 saiti |
| 9 | Bangaren sarrafa wutar lantarki | 1 saiti |
| NO | Sunan Inji | QTY |
| 1 | Conical biyu dunƙule extruder ko Single dunƙule extruder | 1 saiti |
| 2 | metering famfo da allon canza fuska | 1 saiti |
| 3 | Mold | 1 saiti |
| 4 | Na'ura mai kaifi uku | 1 saiti |
| 5 | Kula da yanayin zafi don kalanda | 1 saiti |
| 6 | Kwancen sanyaya, na'urar yankan baki | 1 saiti |
| 7 | Injin cirewa | 1 saiti |
| 8 | Auto- Stacker ko Wind tasha Biyu | 1 saiti |
| 9 | Bangaren sarrafa wutar lantarki | 1 saiti |
Screw: Babban fitarwa & rabo L/D.Tasirin ƙira na musamman mataki biyu, tare da ra'ayin filastik ƙarancin zafin jiki.
Ganga: ganga an yi shi da ƙarfe na musamman na ƙarfe, kuma an sanye shi da foil na zafin jiki na aluminum tare da tsarin sanyaya iska.
Gearbox: Gears an yi su ne da ƙarfe na ƙarfe tare da magani mai zafi kuma an gama su da niƙa daidaitaccen ƙasa.Ta amfani da tsarin sanyaya allurar mai, yana rage hayaniya yayin aiki a ƙarƙashin babban RPM kuma yana haɓaka tsawon rayuwar kayan aiki.
Motoci: Motar AC, shahararrun samfuran samfuran da aka zaɓa.Omron Inverter ne ke sarrafawa.
Tsarin sarrafawa: Ɗauki zaɓaɓɓen samfura masu inganci da shahararru daga Turai, da ƙera Japan.Na'ura tana aiki mafi kwanciyar hankali kuma tsawon lokacin aiki.
| Samfura | SJ-90/33 |
| Extrude tsakiyar tsawo | 1000mm |
| Max.fitarwa | 300kg/h |
| Babban inganci dunƙule | |
| Diamita | 90mm ku |
| L/D | 33:1 |
| Kayan abu | 38CrMoAlA |
| Maganin Sama | Nitrided da goge |
| Saurin jujjuyawa | 20 ~ 116r/min |
| ganga dunƙule | Sabuwar ƙirar ƙira mai sauri |
| Ganga | |
| Kayan abu | 38CrMoAlA |
| Maganin saman saman ciki | Nitrided, ƙasa |
| Hanyar dumama | Ta yumbu |
| Yankunan sarrafa dumama | 6 yankuna |
| Ƙarfin zafi | 36KW |
| Tsarin sanyaya | Ta hanyar busa fan |
| Yankunan sanyaya | 6 yankuna |
| Ƙarfin sanyi | 0.25KW*6 |
| Akwatin Gear | |
| Kayan gidan | QT200 |
| Nau'in Gear | Helical gears |
| Material na kayan aiki | 20CrMnTi |
| Zafi magani na gear surface | Quenching |
| Material na gatari bearings | 40CrIshigo da ingancin inganci mai inganci |
| Toshewar ciyarwa | |
| Kayan abu | Q235 |
| Hanya | Ruwa da'irar sanyaya tsarin |
| Mai ciyarwa ta atomatik | |
| Hanya | Tare da hanyar tsotsawar iska |
| Matsakaicin adadin jigilar kaya | 500kg/h |
| Motar tuƙi | |
| Hanya | Motar AC, 90KW |
| Tsarin sarrafawa | Omron AC mai magana da mitar |
| Gabaɗaya girma (L x W x H) | 3650mm x 600mm x 2800mm |
| Nauyi | 3000kg |
Calender na nadi uku da mai yankan gefe saiti ɗaya
| Nisa samfurin | mm | 1220 | |
| Shirye-shiryen kauri, ko rata | Min. | mm | 0.2 |
| Max. | mm | 1.0 | |
| Roller diamita | Babban abin nadi, sup | mm | Ø400 |
| Nadi na tsakiya, med | mm | Ø400 | |
| Nadi na kasa, inf | mm | Ø315 | |
| Tsawon abin nadi | mm | 1300 | |
| A kauri na chrome surface | mm | 0.1-0.12 | |
| Yanayin chrome na saman | aji | 12 | |
| No. na rollers | PCs | 3 | |
| Max.Gudun linzamin kwamfuta | m/min | 15 | |
| Ikon tuƙi | kw | 2.2 | |
| Yawan tuƙi | PCs | 3 | |
| Ƙarfin motsi | kw | 0.75 | |
| Max.tadawa dist.Na babba ko kasa abin nadi | mm | 50 |
